Plan the demolition and fit-out waste from a bathroom renovation without guessing the bin size. Enter the postcode or suburb, select the materials being removed, and receive one recommended waste plan using current published products.
A free tool that sizes your project's waste and recommends one bin plan — with live local pricing and direct booking links.
Learn more
Project Waste Autopilot is a free Australian skip-bin and waste-removal planning tool. It estimates project waste volume and weight, separates likely waste categories, checks the entered postcode or suburb against active and published Local Skip Bin Hire products, and produces one recommended plan with direct booking links.
1 Project2 Location3 Waste4 Plan
Checking the job and matching local options…
Bathroom renovation waste — what to plan for
A bathroom renovation produces a surprisingly dense mix of waste in a small space. Tiles, mortar and old fixtures are heavy, while cabinetry and plasterboard are bulky but light. Because weight and volume pull in different directions, the right skip depends on how much tiling and how much fit-out you're removing.
Common materials
Floor and wall tiles, mortar bed and screed (heavy)
Old vanity, toilet, basin and bath or shower base
Plasterboard, cement sheet and timber framing offcuts
Old tapware, mirrors, and waterproofing membrane
Typical phases
Strip-out: fixtures and tiles removed — the heaviest stage
Rough-in: minor framing, sheet and offcut waste
Fit-out: packaging and trim offcuts from new fixtures
What drives the bin size and cost: the tile and mortar volume is the main factor. Heavy waste (tiles, concrete screed) is subject to weight limits, so a smaller heavy-waste bin can suit a bathroom better than a larger general-waste bin that would exceed its weight allowance.
Example plan sequence
A single-bathroom strip-out often suits one small-to-mid heavy-waste bin for tiles and mortar during demolition, with general-waste fit-out offcuts added to the same bin if weight allows. The planner matches this to current products for your postcode.
Bathroom planner — FAQs
What size skip do I need for a bathroom renovation?
Most single-bathroom strip-outs suit a small to mid-size bin, but because tiles and mortar are heavy, the weight allowance matters more than volume. Enter your postcode in the planner for a recommendation matched to current local products and your specific waste mix.
Can I put bathroom tiles and concrete in a general waste skip?
Tiles, mortar and concrete are classed as heavy waste and usually need a heavy-waste bin rather than a general-waste one, because they exceed general-waste weight limits quickly. The planner selects the correct waste type for you.
Do I need a permit for a skip during my bathroom reno?
Only if the bin is placed on public land such as a road or nature strip; on your own driveway or property no council permit is generally required. Permit rules vary by council and are the customer's responsibility.
Check service areas, bin sizes and waste categories
Use the planner to check currently published options for Sydney, Melbourne, Brisbane, Adelaide, Perth and other serviced Australian locations. Availability and pricing depend on the entered postcode or suburb.
FREQUENTLY ASKED QUESTIONS
Skip bin and project waste planning questions
How does the planner choose a skip bin size?
It estimates the loose waste volume from the selected project, scale and materials, applies a capacity margin, and compares the result with matching active and published products for the entered postcode or suburb.
Are the displayed prices live?
The planner reads the current price and variant ID from products that are active, available and published to the Shopify Online Store feed. Always confirm dates, included weight and product conditions before checkout.
Can concrete, tiles or soil go in a general-waste bin?
Dense materials can be restricted by waste type, bin size and weight. Clean concrete and clean soil may require separate uncontaminated loads. The selected product conditions control what is permitted.
Does a skip bin need a council permit?
A bin placed entirely on private property usually avoids public-land permit requirements. Placement on a road, nature strip or other public land may require council approval, which should be confirmed before delivery.
What happens when the waste needs more than one bin?
The engine can recommend a staged plan containing more than one bin or a collection-and-replacement sequence when the estimated capacity or material separation requires it.
Can experienced trades enter their own volume or weight?
Yes. Trade / Experienced mode accepts a known loose volume in cubic metres and an estimated weight in tonnes while retaining the location and product checks.
What is the Load & Go option?
Load & Go is an alternative where the service vehicle arrives, the waste is loaded and the vehicle leaves without a skip bin remaining onsite. It is shown only when a matching active and published service is available for the location.
What should I do when the waste is unusual or difficult to identify?
Use Tidio live chat to describe the material and attach photographs, plans or item lists. You can also call the Local Skip Bin Hire team during support hours.
